IMC CANSAS - Page 498

498 General Technical Specs
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
Voltage measurement
Parameter
typ.
min. / max.
Remarks
Range
10 V, 5 V 2 V, 1 V 500 mV,
200 mV , 100 mV
60 V, 20 V
with divider-plug
Gain uncertainty
<0.025 %
<0.075 %
<0.075 %
<0.05 %
<0.15 %
<0.15 %
23°C
with standard connector
with divider connector (only SC-16)
shunt connector
Gain drift
30 ppm/K(typ.)
50 ppm/K(typ.)
60 ppm/K(max.)
90 ppm/K(max.)
range 50 V
range 10 V
Offset
<0.02 %
over entire temperature range
Linearity uncertainty
<50 ppm
range ±10 V
Current mode
Range
±40 mA, ±20 mA, ±10 mA, ±4 mA, ±2
mA
with shunt connector (50 )
Temperature
Thermocouples
Range
-200°C to +1200°C
Typ: R, S, B, J, T, E, K, L, N
(max. one type per configuration)
Temperature uncertainty
0.2 K
< 0.5 K
Typ: J, T, K, E, L (other types:
uncertainties of voltage measurements)
@ 20°C over entire input range
sample rate SC16: 1 s
Drift
0.02 K/K T
a
T
a
=|T
a
-25°C|; ambient temp: T
a
Uncertainty of cold junction
Compensation
< 0.15 K
< 0.5 K
< 0,15 K
with imc plug ACC/DSUB-T4
with CANSAS-K1-SC16-2T
with CANSAS-L-SC16-2T-Y
Drift of cold junction
0.001 K/K T
j
T
j
= |T
j
-25°C| could junction T
j
RTD mode (Pt100)
Range
-200°C to +850°C
(reference current: 410 µA, int.
calibrated)
Use of thermo-plug provides complete
set of terminals for full 4-wire connection
scheme;
mixed configuration with thermocouples
supported
Uncertainty
< 0.2 K
< 0.05 %
-200°C to 850°C, four-wire connection
plus percentage of reading
Drift
0.01 K/K T
a
T
a
=|T
a
-25°C|; ambient temp: T
a