IMC CANSAS - Page 76

76 Operation
imc CANSAS Users Manual - Doc. Version 1.9 - 05.12.2014© 2014 imc Meßsysteme GmbH
The following actions can be initiated from the keyboard:
Combination of keys
Action
Pos 1
Selects the Database (root) icon.
End
Selects the last entry in the Tree.
Up arrow
Selects the next entry above.
Down arrow
Selects the next entry below.
Right arrow
Selects the first of the subordinate entries.
Left arrow
The next-higher-level entry is selected or the branch collapsed.
PgUp
The topmost visible entry is selected.
PgDown
The bottom-most visible entry is selected.
Shift + End
Multiple selection: all entries from the last selection to the end of the Tree.
Shift + Pos 1
Multiple selection: all entries from the last selection to the top of the Tree.
Shift + PgUp
Multiple selection: all entries from the last selection to the topmost visible entry.
Shift + PgDown
Multiple selection: all entries from the last selection to the bottom-most visible entry.
Shift + Up arrow
Multiple selection: all entries from the last selection to the next entry above.
Shift + Down arrow
Multiple selection: all entries from the last selection to the next entry below.
Ctrl + Up arrow
The focus is directed at the next entry above. The existing selection is retained.
Ctrl + Down arrow
The focus is directed at the next entry below. The existing selection is retained.
Ctrl + <Space>
Toggles the selection on/off in the entry with the focus..
Ctrl + End
The focus is shifted to the end of the Tree.
Ctrl + Pos 1
The focus is shifted to the top of the Tree.
Ctrl + PgUp
The focus is shifted to the topmost entry in the Tree.
Ctrl + PgDown
The focus is shifted to the bottom-most entry in the Tree.
Changing names
The Tree lets you edit the entry names. The following entry types' names can be edited:
imc CANSAS module
CAN message
input/output channel
virtual channel
If an already selected entry is clicked over, a small input box appears for
editing the text. The editing process is completed by hitting the <Enter>
key, or by selecting another entry. Thereafter, the new name is checked by
the system and appears in the Properties display.
The editing process can be aborted by hitting <Esc>…
If an entry is in editing-mode, the commands 'Edit/Undo', 'Edit/Cut', 'Edit/Copy' and 'Edit/Paste' are
available. In other words, the names can be edited with the help of the Clipboard.
Deleting entries
The following entry types can be deleted from the Module Tree: