Lexmark X945e MFP 7510 series - RIP Card Access Cover Removal; RIP Card Assembly Removal

4-84 Service Manual
7510
Go Back
Previous
Next
RIP card access cover removal
1. Using your finger, lift the RIP card access cover (A) by the notch.
2. Remove the RIP card access cover (A).
RIP card assembly removal
1. Remove the two screws securing the RIP card assembly (A) to the machine.
2. Pull the two knurled thumb screws to remove the RIP card assembly (A) from the machine.
3. Remove the RIP card assembly (A) from the machine.