Preventive maintenance 6-3
7510
Lubrication specifications
Lubricate only when parts are replaced or as needed, not on a scheduled basis. Use of lubricants other than
those specified can cause premature failure. Some unauthorized lubricants may chemically attack
polycarbonate parts. Use IBM no. 10 oil, P/N 1280443 (Approved equivalents: Mobil DTE27, Shell Tellus 100,
Fuchs Renolin MR30), IBM no. 23 grease (Approved equivalent Shell Darina 1), and grease, P/N 99A0394 to
lubricate appropriate areas.
Scheduled maintenance
The LCD displays 80 scheduled maintenance at each 100K and 600K page count interval. It is necessary to
replace the appropriate maintenance kit at this interval to maintain the print quality and reliability of the printer.
The parts are available as a maintenance kit with the following part numbers:
40X4031—100K Maintenance Kit, 110 V
40X4093—100K Maintenance Kit, 220 V
40X4032—600K Maintenance Kit, 110 & 220 V
The ADF requires scheduled maintenance at each 150K page count interval. It is necessary to replace the feed/
pick roll assembly and the separation guide assembly at this interval to maintain ADF media feed reliability. The
parts are available as a maintenance kit with the following part number:
40X4033—Maintenance Kit, ADF
To Next Page
Loading...
Need help?
General
