Lexmark X945e MFP 7510 series User Manual

Repair information 4-97
7510
Go Back
Previous
Next
6. Release the harnesses from the clamps.
7. Remove the four screws securing the 5V LVPS card bracket assembly (A) to the machine.
8. Remove the 5V LVPS card bracket assembly (A).
5V LVPS card assembly removal
1. Remove the rear cover assembly. See “Rear cover assembly removal” on page 4-5.
2. Remove the rear upper cooling fan bracket assembly. See “Rear upper cooling fan bracket assembly
removal” on page 4-111.
3. Remove the developer / transfer roll HVPS card assembly. See “Developer / transfer roll HVPS card
assembly removal” on page 4-112.
4. Remove the lower printer engine card bracket assembly. See “Lower printer engine card bracket
assembly removal” on page 4-90.
5. Remove the 5V HVPS card bracket assembly. See “5V LVPS card bracket assembly removal” on
page 4-96.
6. Remove the four screws securing appropriate 5V LVPS card assembly (A) to the 5V HVPS card bracket
assembly.

Lexmark X945e MFP 7510 series Specifications

General

Brand	Lexmark
Model	X945e MFP 7510 series
Category	Printer
Language	English