1 - 96 Attendant Add-On Console Transfer/Camp-On Recall Timer Selection
NEC Business Solutions Ltd Xen Master & Xen Axis
A6-324000-642-02 - Release 6.0
May 2003
1-1-64
System Mode
1
Submode
1
Data No.
64
PC Programming
a
+BM
Attendant Add-On Console Transfer/
Camp-On Recall Timer Selection
General Description
Use this Memory Block to specify the time interval before a Ring Transfer or Station Camp-
On from a station with an Attendant Add-On Console recalls back to the originating station if
the call is not answered.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates the default setting.
0.5 min. 1 min. 1.5 min. 2 min.
LK 5 LK 6 LK 7 LK 8
3 min. 5 min. 8 min. 10 min.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 +
FD to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-11
System Transfer/Camp-On Selection
1-1-12
Station Transfer/Camp-On Recall Timer Selection
1-6-01
Attendant Add-On Console to Telephone Port Assignment
1-8-08
Class of Service (Station) Feature Selection 2
N
1. When a station without an assigned Attendant Add-On Console transfers or camps-on a call to a station that goes
unanswered, the call recalls using Memory Block 1-1-12 Station Transfer/Camp-On Recall Timer Selection.
2. Timer is valid only for stations assigned an Attendant Add-On Console in Memory Block 1-6-01 Attendant Add-On
Console to Telephone Port Assignment. The
Nkeyon the station and the console are both affected.
6 4 : D S S R E C L 1 . 0
T I M E D I S P L A Y
Data
No.
Title
1~7
Setting
Data
To Next Page
Loading...
Need help?
General
