NEC Xen Master Programming Manual

Speed Dial Number/Name Display Selection 1 - 63
Programming Manual May 2003
A6-324000-642-02 - Release 6.0 May 2003
1-1-33
System Mode
1
Submode
1
Data No.
33
PC Programming
a
+BE
Speed Dial Number/Name Display
Selection
General Description
Use this Memory Block to specify whether the dialled number or name is displayed first on
the LCD of the originating station when an outgoing call is made using Speed Dial.
Display
Settings
LK 1 LK 2 LK 3 LK 4
Dialled
Number
Name
The shaded area indicates the default setting.
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
2 Press LK1 +
LK1 + CC to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-18
System Speed Dial Restriction by Tenant
1-1-35
Speed Dial Buffer Allocation
N
If a message (the name of the dialled party) is not entered, only the dialled number is displayed regardless of
programming in the Memory Block.
3 3 : S P D D I A L D I S P
T I M E D I S P L A Y
Data
No. Title
Setting
Data
Title

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English