NEC Xen Master Programming Manual

MIF (Caller ID) Assignment 1 - 413
Programming Manual May 2003
A6-324000-642-02 - Release 6.0 May 2003
7-3-04
System Mode
7
MIF
3
Data No.
04
PC Programming
a
+BS
MIF (Caller ID) Assignment
General Description
Use this Memory Block to enable the Caller ID scrolling or outdial function on the MIFM-U13
ETU. Basic Caller ID works without an MIFM-U13 ETU installed.
Display
Programming Procedures
1 Go off-line.
2 Press LK7 + LK3 +
J + J +KD to access the Memory Block.
3 Use the dial pad to enter data.
Note: Use the following to enter data:
J to move the cursor left
L to move the cursor right
K~I to enter numeric data
Setting Data 00, 01, 02
Default Values
No Function (00)
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
Caller ID scrolling and outdial must have the KMM(XXX)U installed on the MIFM-U13 ETU.
0 4 : C L A S S M I F = 0 0
T I M E D I S P L A Y
Data
No.
Title
Setting
Data

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English