1 - 360 APR Ring Mode Assignment
NEC Business Solutions Ltd Xen Master & Xen Axis
A6-324000-642-02 - Release 6.0
May 2003
4-40
System Mode
4
Submode
—
Data No.
39
PC Programming
a
+BTM
APR Ring Mode Assignment
General Description
Use this Memory Block to specify the ringing mode for an Single Line Telephone connected
to the APR-U.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates the default setting.
No Ring
Station
Number
only
All Ring
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
2 Press LK4 +
CI to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option.
Note: Use the following to enter data:
R select next Tel Port No.
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. No Ring means that no calls ring at the Single Line Telephone.
2. Station Number ring means that only calls directed to the Multiline Terminal Station Number, ring at the Single Line
Telephone.
3. All Ring means that all calls that ring at the Multiline Terminal also ring at the Single Line Telephone.
4. Telephone ports A0~C0 are ports 100~120.
0 1 / 3 9 : A D A 2 = S T A
T I M E D I S P L A Y
Data
No.
Tel Port No.
(01~99)
A0~C0
Title
Setting
Data
To Next Page
Loading...
Need help?
General
