NEC Xen Master Programming Manual

Modem Port for Remote Programming Assignment 1 - 225
Programming Manual May 2003
A6-324000-642-02 - Release 6.0 May 2003
1-8-38
System Mode
1
Submode
8
Data No.
38
PC Programming
a
+CSS
Modem Port for Remote
Programming Assignment
General Description
A socket modem can be installed on the MIFM-U13 ETU when the MIFM-U13 ETU is
installed in S1 or S2 of the B64-U13 KSU or S2 of the B48-U13 KSU. Use this Memory
Block to assign the extension number for the socket modem.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 +
CH to access the Memory Block.
3
Use dial pad to enter number of digits.
Note: Use the following to enter data:
K~I to enter digits
J to move cursor left
L to move cursor right
Default Values
Not assigned
Setting Data Extension No.
00 ~ 99
000 ~ 999
0000 ~ 9999
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
7-1
Card Interface Slot Assignment
3 8 : M O D E M =
T I M E D I S P L A Y
Data
No.
Title
Setting
Data

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English