NEC Xen Master Programming Manual

1 - 410 MIF (LCR) Assignment
NEC Business Solutions Ltd Xen Master & Xen Axis
A6-324000-642-02 - Release 6.0 May 2003
7-3-01
System Mode
7
MIF
3
Data No.
01
PC Programming
a
+BS
MIF (LCR) Assignment
General Description
Use this Memory Block to enable the Least Cost Routing (LCR) function of the MIFM-U13
ETU.
Display
Programming Procedures
1 Go off-line.
2 Press LK7 + LK3 +
KA to access the Memory Block.
3 Use the dial pad to enter data.
Note: Use the following to enter data:
J to move the cursor left
L to move the cursor right
K~I to enter numeric data
Setting Data 00, 01, 02
Default Values
No Assignment (00)
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. The LCR feature requires a KMM(1.0)U unit to be installed on the MIFM-U13 ETU.
2. SMDR feature is enabled automatically when LCR is set to 01.
0 1 : L C R M I F = 0 0
T I M E D I S P L A Y
Data
No.
Title
Setting
Data

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English