Specified Station Access Code Assignment 1 - 121
Programming Manual May 2003
A6-324000-642-02 - Release 6.0
May 2003
1-2-08
System Mode
1
Submode
2
Data No.
08
PC Programming
a
+BA
Specified Station Access Code
Assignment
General Description
Use this Memory Block to assign specific stations to be called using abbreviated dialling.
Up to 24 stations can be assigned.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK2 +
KHto access the Memory Block.
3 Enter the options using the dial pad.
Note: Use the following to enter data:
J to move the cursor left
L to move the cursor right
U to clear data
Default Values
4 Press
Nto display the Tel. Port No. 01.
5 After entering the Specified Station No. Access Code, press
Nto advance to the next Station No.
6 PressNto write the data.
7 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-46
Access Code (1-Digit) Assignment
1-1-47
Access Code (2-Digit) Assignment
1-4-14
Automated Attendant Message Access Code (1-Digit) Assignment
1-4-15
Automated Attendant Message Access Code (2-Digit) Assignment
N
1. Specified stations can be accessed from intercom (ICM) dial tone or as an outside caller calling into the Xen system
via Auto Attendant.
2. The Specified Access Code is assigned in Memory Blocks 1-1-46 Access Code (1-Digit) Assignment or 1-1-47
Access Code (2-Digit) Assignment.
0 8 : S P C L E X T 0 0 = 0 1
T I M E D I S P L A Y
Title
Data
No.
Specified
Station
Access
Code
00~23
Tel. Port
No.
00~99
A0~A9
B0~B9C0
Setting Data
Tel. Port No. 01~120
Specified Station Access Code is 00~23
Access
Code No.
Value
00 01
01-23 Not Set
To Next Page
Loading...
Need help?
General
