NEC Xen Master - 4-61 Station Name;Number Display Selection

Station Name/Number Display Selection 1 - 379
Programming Manual May 2003
A6-324000-642-02 - Release 6.0 May 2003
4-61
System Mode
4
Submode
—
61
PC Programming
a
+BTT
Station Name/Number Display
Selection
General Description
Use this Memory Block to specify whether the station name and/or station number shall be
displayed on an idle Multiline telephone’s LCD.
Display
Settings
LK 1LK 2LK 3LK 4
The shaded area indicates the default setting.
NONE ICM NAME BOTH
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
2 Press LK4 +
FA to access the Memory Block.
3 Press the corresponding CO/PBX line key to change language option.
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
4-10
Station Number Assignment
4-18
Station Name Assignment
N
1. Telephone ports A0~C0 are ports 100~120.
2. Press
Q+ 1, 2, 3 = A, B, C for Port Number.
0 1 / 6 1 : L C D N O N E
T I M E D I S P L A Y
Data
No.
Tel Port No.
(01~99)
A0~C0
Setting
Data
Title