NEC Xen Master Programming Manual

Immediate Print-Out Selection for Telephone 1 - 375
Programming Manual May 2003
A6-324000-642-02 - Release 6.0 May 2003
4-56
System Mode
4
Submode
—
Data No.
56
PC Programming
a
+AS
Immediate Print-Out Selection
for Telephone
General Description
Use this memory block to enable/disable (per station) SMDR print-out after finishing CO/
PBX call.
Display
Settings
LK 1LK 2LK 3LK 4
The shaded area indicates the default setting.
Ys No
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
2 Press LK4 +
EF to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option.
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-5-13
Printer Connected Selection
1-5-23
Outgoing Mode Selection
N
1. This memory block is applicable for main software Release 4.0 and above.
0 1 / Y S
T I M E D I S P L A Y
Data
No.
Tel Port No.
(01~99)
A0~C0
Setting
Data
Title

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English