1 - 262 Dial-In Tenant Incoming Limit Assignment
NEC Business Solutions Ltd Xen Master & Xen Axis
A6-324000-642-02 - Release 6.0
May 2003
2-09
System Mode
2
Submode
—
Data No.
09
PC Programming
a
+BN
Dial-In Tenant Incoming Limit
Assignment
General Description
Use this Memory Block to assign names for telephone stations.
Display
Programming Procedures
1 Go off-line.
2 Press LK2 +
KI to access the Memory Block.
3 Use the dial pad to enter data. Refer to Section 7 Character Code Tables, and enter
the 3-digit code to display each character.
Note: Use the following to enter data:
J to move the cursor left
L to move the cursor right
K~I to enter numeric data
Rto go to next Tenant.
Setting Data: 0 = No Limit
1~64 = Number of effective incoming
Default Values
No Limit = 0
4 Press
Nto write the data.
5 After entering all data, press
N
6 PressPto go back on-line.
Related Programming
M.B. Number Memory Block Name
2-01
Trunk to Tenant Assignment
N
1. This memory block is applicable to main software Release 4.0 and above.
0 0 / 0 9 : L I M I T 0 0
T I M E D I S P L A Y
Data
No.
Tel Port
No.
(00~47)
A0~C0
Title
Data
To Next Page
Loading...
Need help?
General
