Station Transfer/Camp-On Recall Timer Selection 1 - 41
Programming Manual May 2003
A6-324000-642-02 - Release 6.0
May 2003
1-1-12
System Mode
1
Submode
1
Data No.
12
PC Programming
a
+BM
Station Transfer/Camp-On Recall
Timer Selection
General Description
Use this Memory Block to specify the time interval before a Ring Transfer or Station
Camp-On from a station (without an Attendant Add-On Console) recalls back to the
originating station when the call is not answered.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates the default setting.
25 sec. 45 sec. 60 sec. 90 sec.
LK 5 LK 6 LK 7 LK 8
120 sec. 180 sec. 240 sec. No Limit
Programming Procedures
1 Go off-line.
2 Press LK1 +
LK1 + AB to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-11
System Transfer/Camp-On Selection
1-6-05
Attendant Add-On Console Key Selection
1-8-08
Class of Service (Station) Feature Selection 2
N
When a station with an Attendant Add-On Console assigned to it transfers or camps on a call and the call
goes unanswered, the call recalls using Memory Block 1-1-64 Attendant Add-On Console Transfer/Camp-
On Recall Timer Selection.
1 2 : T R F R E C L 6 0 s
T I M E D I S P L A Y
Data
No. Title
Setting
Data