NEC Business Solutions Pty Ltd Xen Master & Xen Axis
1 - 510 PC Programming
A6-324000-642-02 - Release 5.0
May 2003
Edit
The Edit pulldown menu allows files to be edited or swapped.
Undo
Allows the user to undo current edits and return to the previous editing operation.
Copy
Brings up the copy screen. This allows port information to be copied from one port
to another.
Swap
Allows values between two ports to be swapped.
Set Default
Defaults to the current field where the cursor is positioned.
Set Default All
Allows the user to set all values to default on the open tab.
Quick Search
Allows the user to search the Memory Blocks by Memory Block Number, Memory
Block Name, or Tab Name. After the search method is specified, a list is provided.
The user can scroll through the list and click on the desired Memory Block.
System data can then be modified as necessary.
Basic
The Basic pulldown menu allows access to basic programming items.
 Some menu items may be disabled if the appropriate hardware is not
assigned, or a dependent data item is not set.
Figure 3-6 Edit Menu
To Next Page
Loading...
Need help?
General
