1 - 204 System Refresh Timer Assignment
NEC Business Solutions Ltd Xen Master & Xen Axis
A6-324000-642-02 - Release 6.0
May 2003
1-8-11
System Mode
1
Submode
8
Data No.
11
PC Programming
a
+BM
System Refresh Timer Assignment
General Description
Use this Memory Block to assign the System Refresh Time during idle periods/no change in
state.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates the default setting.
No Refresh 4 hr. 8 hr. 12 hr.
LK 5 LK 6 LK 7 LK 8
24 hr.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 +
AAto access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
N
1. The system automatically refreshes itself during idle periods based on the time specified in this Memory Block.
2. If there is a call in progress during Refresh Time activity and no other actions occurring in the system at that time, the
system will refresh.
1 1 : R E F R E S H 4 H
T I M E D I S P L A Y
Data
No.
Title
Setting
Data