NEC Xen Master Programming Manual

Call Forward-Busy Immediately/Delay Selection 1 - 363
Programming Manual May 2003
A6-324000-642-02 - Release 6.0 May 2003
4-42
System Mode
4
Submode
—
Data No.
42
PC Programming
a
+BTT
Call Forward-Busy Immediately/
Delay Selection
General Description
Use this Memory Block to specify immediate forward (No) or delay forward (Yes) for an
Incoming CO/PBX call if the station is set for Call Forward Busy.
Display
Settings
LK 1 LK 2 LK 3 LK 4
The shaded area indicates the default setting.
No Yes
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
2 Press LK4 +
DB to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option.
Note: Use the following to change option:
Rto select next Tel Port No.
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-2-22
Call Forward No Answer Timer Selection
N
Telephone ports A0~C0 are ports 100~120.
0 1 / 4 2 : B U S Y F W D Y S
T I M E D I S P L A Y
Data
No.
Tel Port No.
(01~99)
A0~C0
Title
Setting
Data

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English