NEC Xen Master - Section 7 Character Code Tables

NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 442
A6-324000-642-02 – Release 6.0 May 2003
SECTION 7
C
HARACTER CODE
T
ABLES
The character code tables are used when entering some of the functions provided
with the Xen system. The following tables apply only to System Software Version
1.xx.
Version 2.XX, or higher uses “Direct Keypad Alphanumeric Character Entry”. For
Key Pad entry refer to 7.1 Dial Pad Character Assignment.
Note: Codes 166~221 and 250~252 are used for Japanese characters
only.
Character Code Character Code Character Code
BLANK 032 @ 064 \ 096
! 033 A 065 a 097
|| 034 B 066 b 098
# 035 C 067 c 099
$ 036 D 068 d 100
% 037 E 069 e 101
& 038 F 070 f 102
‘ 039 G 071 g 103
( 040 H 072 h 104
) 041 I 073 i 105
* 042 J 074 j 106
+ 043 K 075 k 107
, 044 L 076 l 108
— 045 M 077 m 109
– 046 N 078 n 110
/ 047 O 079 o 111
0 048 P 080 p 112
1 049 Q 081 q 113
2 050 R 082 r 114
3 051 S 083 s 115
4 052 T 084 t 116
5 053 U 085 u 117
6 054 V 086 v 118
7 055 W 087 w 119
8 056 X 088 x 120
9 057 Y 089 y 121
: 058 Z 090 z 122
; 059 [ 091 { 123
< 060 ¥ 092 | 124
= 061 ] 093 } 125
> 062 ^ 094 Æ 126
? 063 _ 095 ¨ 127