NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 468 Guide to Feature Programming
A6-324000-642-02 – Release 6.0
May 2003
¦
+AR
VRS Message Recording Time Selection 1-8-12
¦
+AR
VRS Message Function Assignment
1-8-13
¦
+AR
Delay Announcement Assignment
3-41
Note 1: To record the Delay Announcements:
First Announcement
– Dial Access Code  Dial A  Dial C  Dial A
(Access Codes are set in Memory Blocks 1-1-46, 1-1-47, or 1-1-48)
Second Announcement
– Dial Access Code  Dial A  Dial C  Dial B
(Access Codes are set in Memory Blocks 1-1-46, 1-1-47, or 1-1-48)
Note 2: Requires an MIFA-U13 ETU or MIFM-U13 ETU before the Memory Block can be programmed.
Note 3: Incoming analogue trunks must provide Reversal On Idle and Reversal On Answer signalling for correct
logging of abandoned calls.
Delay Announcement (Continued)
Menu Access
Keyboard Shortcut
System Data Name Memory Block
Delayed Ringing
Menu Access
Keyboard Shortcut
System Data Name Memory Block
¦
+BCM
Delayed Ringing Timer Assignment (CO)
1-1-77
¦
+BI
Delayed Ringing Timer Assignment (ICM) 1-2-26
¦
+BTT
CO/PBX Ring Assignment (Day Mode) 4-01
¦
+BTT
CO/PBX Ring Assignment (Night Mode) 4-02
¦
+BTM
Line Selection for Telephone Mode 4-12
¦
+BTM
Extension Line Key Ring Assignment (Day Mode) 4-37
¦
+BTM
Extension Line Key Ring Assignment (Night Mode) 4-38
Dial 9 for Attendant
Menu Access
Keyboard Shortcut
System Data Name Memory Block
¦
+BA
Access Code (1-Digit) Assignment 1-1-46
¦
+BA
Specified Station Access Code Assignment 1-2-08
¦
+BTS
Class of Service (Attendant) Feature Selection 1 1-8-07
¦
+BTT
Station to Class of Service Feature Assignment 4-17
To Next Page
Loading...
Need help?
General
