External Speaker Chime Selection 1 - 189
Programming Manual May 2003
A6-324000-642-02 - Release 6.0
May 2003
1-7-08
System Mode
1
Submode
7
Data No.
08
PC Programming
a
+BP
External Speaker Chime Selection
General Description
Use this Memory Block to determine whether paging alert tone (4 tones) or alert chime
sounds before the speech path is established, or after, or before and after.
PRT = Normal Paging Tone Before the Page
C-S = Chime - Start Only (4 Tone Chime)
C-B = Chime - Both Start and End (4 Tone Chime)
Display
Settings
LK 1LK 2LK 3LK 4
The shaded area indicates the default setting.
PRT C-S C-B
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
2 Press LK1 + LK7
+KHto access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
LK - On = Enabled
LK - Off = Disabled
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-7-03
External Paging Alert Zone Selection
1-7-09
External Speaker Chime Start Time Selection
N
Memory Block 1-7-03 External Paging Alert Zone Selection must be enabled before this Memory Block has any affect.
0 8 : S P K O N P R T
T I M E D I S P L A Y
Data
No.
Title
Setting
Data
To Next Page
Loading...
Need help?
General
