1 - 418 Station Speed Dial Memory Clear
NEC Business Solutions Ltd Xen Master & Xen Axis
A6-324000-642-02 - Release 6.0
May 2003
8-3
System Mode
8
Spd-Clr-Sta
3
Data No.
—
PC Programming
a
+BE
Station Speed Dial Memory Clear
Use this Memory Block to clear the Station Speed Dial memories of all programmed Speed
Dial numbers.
N
Before programming this procedure, please ensure you understand completely the
affect of erasing all Station Speed Dial buffers in the system.
Display
Programming Procedures
1 Go off-line.
2 Press LK8 + LK3
to access the Memory Block.
3 When the system display prompt indicates CLR TEL SPD?, the first four CO/PBX lines light red.
4 Press
HBIIto enter the fixed password.
Note: When entering the password the top line of CO/PBX LEDs change from red to green each time a number of the password
is pressed.
5 Press
Nto write the data.
6 Press
Pto go back on-line.
Related Programming
No related programming is necessary for this Memory Block.
C L R T E L S P D ?
T I M E D I S P L A Y
WWWW
Red Red Red Red
H =
WWWW
Green Red Red Red
WWWW
Green Green Red Red
B =
WWWW
Green Green Green Red
I =
WWWW
Green Green Green Green
I =
To Next Page
Loading...
Need help?
General
