1 - 190 External Speaker Chime Start Time Selection
NEC Business Solutions Ltd Xen Master & Xen Axis
A6-324000-642-02 - Release 6.0
May 2003
1-7-09
System Mode
1
Submode
7
Data No.
09
PC Programming
a
+BP
External Speaker Chime Start
Time Selection
General Description
This Memory Block is used only when paging alert tone (4-tones) is assigned in Memory
Block 1-7-08 (External Speaker Chime Selection). This Memory Block assigns the delay
after an external paging code is dialled and before the paging alert tone is provided.
Display
(Page 1)
LK 1 LK 2 LK 3 LK 4
The shaded area indicates the default setting.
0 ms. 100 ms. 200 ms. 300 ms.
LK 5LK 6LK 7
LK 8
400 ms. 500 ms. 600 ms.
700 ms.
(Page 2)
LK 1 LK 2 LK 3 LK 4
800 ms. 900 ms. 1000 ms. 1100 ms.
LK 5 LK 6 LK 7 LK 8
1200 ms. 1300 ms. 1400 ms. 1500 ms.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK7
+KIto access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
Note: Use the following when entering data:
Sto go to the next page
T to go to the previous page
4 Press
Nto write the data and advance to Memory Block 1-8-01 SLT or Automated Attendant/DISA to PBR Selection.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-7-08
External Speaker Chime Selection
0 9 : S T A R T = 7 0 0 m s
T I M E D I S P L A Y
Data
No.
Title
Setting
Data
To Next Page
Loading...
Need help?
General
