NEC Xen Master - Direct Inward Dialling (DID)

NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 470 Guide to Feature Programming
A6-324000-642-02 – Release 6.0 May 2003
¦
+BS
Station Number Assignment 4-10
¦
+BTM
Line Key Selection for Telephone Mode 4-12
¦
+BTT
Intercom Master Hunt Number Selection 4-14
¦
+BTT
Intercom Master Hunt Number Forward Selection 4-15
¦
+BTT
Station to Class of Service Feature Assignment 4-17
¦
+BS
Telephone Type Assignment 7-2
Digital Voice Mail (Continued)
Menu Access
Keyboard Shortcut
System Data Name Memory Block
Direct Inward Dialling (DID)
Menu Access
Keyboard Shortcut
System Data Name Memory Block
¦
+ALM
Tie Line Delay Ringing Timer Selection 1-1-07
¦
+ALN
DID Digit Length Selection 1-1-20
¦
+ALN
DID Digit conversion Assignment 1-1-21
¦
+ALN
DID Digit Conversion Table 1-1-22
¦
+ALN
DID Forward Station Number for Undefined Digit 1-1-23
¦
+ALN
Tie Line First Ring Pattern Selection 1-1-34
¦
+ALN
Tie Line Delay Ring Pattern Selection 1-1-53
¦
+BCT
Trunk-to-Trunk Group Assignment 3-03
¦
+ALT
Tie Line Type Assignment 3-14
¦
+ALM
Tie Line Length of Wink Signal Selection 3-21
¦
+ALM
Tie Line Length of Delay Signal Selection 3-22
¦
+BCT
Tie Line Dial Tone Selection 3-27
¦
+ALT
Trunk Type Selection 3-91
¦
+ALN
Digit Add/Delete for Tie Line Networking 5-00
¦
+BS
Card Interface Slot Assignment 7-1