NEC Xen Master Programming Manual

Automatic Day/Night Mode by Day of Week Selection 1 - 61
Programming Manual May 2003
A6-324000-642-02 - Release 6.0 May 2003
1-1-32
System Mode
1
Submode
1
Data No.
32
PC Programming
a
+BM
Automatic Day/Night Mode by Day
of Week Selection
General Description
Use this Memory Block to select either Pattern 1 or Pattern 2 Day/Night Mode start times for
each day of the week. Memory Block 1-1-27 Automatic Day/Night Mode Switching Time
Assignment sets Day/Night Mode start times for Pattern 1 and Pattern 2 to switch the
system between Day Mode and Night Mode.
Display
Settings
LK 1LK 2LK 3LK 4
There is no default setting.
Sun Mon Tue Wed
LK 5 LK 6 LK 7 LK 8
Thu Fri Sat
Programming Procedures
1 Go off-line.
2 Press LK1 +
LK1 + CB to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
Each time a CO/PBX line is pressed, the LED indication changes from Pattern 1 to
Pattern 2.
Default Values
Sunday ~ Saturday = Pattern 1
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-27
Automatic Day/Night Mode Switching Time Assignment
1-8-07
Class of Service (Attendant) Feature Selection 1
4-09
Telephone to Tenant Assignment
4-17
Station to Class of Service Feature Assignment
3 2 : D / N B Y D A Y
T I M E D I S P L A Y
Data
No. Title
CO/PBX
Line LED
Off On
Data
Day/Night
Automatic
Switching
Pattern 1
Day/Night
Automatic
Switching
Pattern 2

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English