Receiving Volume Selection 1 - 385
Programming Manual May 2003
A6-324000-642-02 - Release 6.0
May 2003
4-92
System Mode
4
Submode
—
Data No.
92
PC Programming
a
+BTT
Receiving Volume Selection
General Description
Use this Memory Block to specify whether receiving volume is returned to normal (DOWN)
or kept as is (UP) on a call after hanging up.
Display
Settings
LK 1LK 2LK 3LK 4
The shaded area indicates the default setting.
Down Up
LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
2 Press LK4 +
IB to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option.
Use the following to change option:
R select next Tel Port No.
4 Press
Nto write the data.
5 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-28
Distinctive Ringing by Telephone or CO Selection
N
1. Receiving Volume Down:
Multiline Terminal: The volume (increased by
T+ 2) is reset when you hang up.
Single Line Telephone: Normal.
2. Receiving Volume Up:
Multiline Terminal: The volume (increased by
T+ 2) is not reset when you hang up.
Single Line Telephone: The volume is increased 6 dB.
3. This feature applies to internal and external calls.
4. Telephone ports A0~C0 are ports 100~120.
0 1 / 9 2 : R C V D O W N
T I M E D I S P L A Y
Data
No.
Tel Port No.
(01~99)
A0~C0
Title
Setting
Data
To Next Page
Loading...
Need help?
General
