NEC Xen Master Programming Manual

NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 196 Class of Service (Attendant) Feature Selection 1
A6-324000-642-02 - Release 6.0 May 2003
Classes 00 ~ 15 are programmed in this Memory Block as feature restriction classes. In
Memory Block 4-17 Station to Class of Service Feature Assignment specify any class of
service for each telephone to assign the features the user can/cannot activate.
Corresponding
CO/PBX Line Key
Function Name
Default
Class 00
Default
Class 01
~ 15
Page 01
LK1 Night Mode Switching (System-Wide)) Allow Deny
LK2 Night Mode Switching (Tenant) Allow Deny
LK3 System Speed Dial Programming Allow Deny
LK4 Not Used N/A N/A
LK5 Not Used N/A N/A
LK6 Not Used N/A N/A
LK7 Automatic Trunk-to-Trunk Transfer (Set/Reset)
and programming of Outgoing Numbers
Allow Deny
LK8 Automated Attendant/DISA Mode (Set/Reset) Allow Deny
Page 02
LK1 Timed Alarm (Set/Reset) for Single Line
Telephones
Allow Deny
LK2 – Call Forward-All Call (Set/Reset) from
Destination Station
– Call Forward CAR Keys
– Call Forward All Call Set
– Call Forward Busy/No Answer set
Allow Deny
LK3 System-Wide Reset of Timed Alarm, Call
Forward-All Calls, Do Not Disturb, Customized
Message, and Callback Request
Deny Deny
LK4 Cancel Station Lockout and Default Password
for another Station
Allow Deny
LK5 DISA Password Cancel Allow Deny
LK6 DISA Password Confirmation Allow Deny
LK7 Automated Attendant Weekend Mode (Set/
Reset) Tenant
Allow Deny
LK8 Forced Account Code Programming Allow Deny
Page 03
LK1 Terminal Exchange Mode Set Allow Deny
LK2
~LK8 Not Used N/A N/A

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English