NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 198 Class of Service (Station) Feature Selection 2
A6-324000-642-02 - Release 6.0
May 2003
Settings
(Page 5)
LK 1LK 2LK 3LK 4
Forced Account
Code
Group Listening
Selection
Station
Relocation
Set Call
Forward-Off
Premise
LK 5 LK 6 LK 7 LK 8
Pre-Set Dialling
Live Monitoring
(v2.xx or higher)
2 Row
Caller ID Display
(v2.xx or higher)
Malicious
Call Trace
(v2.xx or higher)
(Page 6)
LK 1LK 2LK 3LK 4
ACR Normal
Originate
(v3.xx or higher)
VM MSG
LED
(v4.xx or higher)
Forced Account
Code
VERIFY/
UNVERIFY
(v4.xx or higher)
ISDN
Supplementary
Services
(V5.xx or higher)
LK 5 LK 6 LK 7 LK 8
Not Used Not Used Not Used Not Used
Programming Procedures
1 Go off-line.9
2 Press LK1 + LK8 +
KHto access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
The LED indication changes to indicate data each time CO/PBX line key is pressed.
Note: Press
S to go to the next page.
Press
T to go back to the previous page.
4 Press
Nkey. Data for Class 01 ~ 15 is displayed successively
5 Press
Nto write the data for class 15.
6 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
4-17
Station to Class of Service Feature Assignment
N
1. Sixteen Classes (00~15) of feature restriction patterns allow a station user to activate particular features while
restricting others.
2. At default, all stations are in Class 00.
3. Stations are assigned to a Class of Service in Memory Block 4-17 Station to Class of Service Feature
Assignment.
CO/PBX
Line Key LED
Off On
Data Deny Allow
Refer to Table on following page for default settings.
To Next Page
Loading...
Need help?
General
