NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 200 Class of Service (Station) Feature Selection 2
A6-324000-642-02 - Release 6.0
May 2003
Corresponding
CO/PBX Line Key
Function Name
Default
Class 00
Default
Class 01
~ 15
Page 04
LK1 LCR Recall Allow Deny
LK2 DSS Key Transfer Operation
Operation applies to Feature Access/One-Touch
keys and Attendant Add-On console keys
programmed for DSS. After you press a DSS key
and go on-hook, only an Allow Call is transferred.
Deny Deny
LK3 Caller ID Deny Deny
LK4
(Future Network Release
is dependant on Carrier
Network)
Caller ID Number Selection
If set for deny, Name is displayed if both name and
number are received.
If set for allow, Number is displayed if both name
and number are received.
Deny Deny
LK5 Manual Live Record Activate Deny Deny
LK6 Auto Live Record Activate. LK5 must be on also. Deny Deny
LK7 BGM Selection Allow Deny
LK8 Unsupervised Conference Deny Deny
Page 05
LK1 Forced Account Code Deny Deny
LK2 Group Listening Selection Deny Deny
LK3 Station Relocation Allow Deny
LK4 Set Call Forward-Off Premise
Related to Page 01(LK1) and Page 02 (LK5)
Deny Deny
LK5 Pre-Set Dialling Deny Deny
LK6 Live Monitoring Deny Deny
LK7 2-Row Caller ID Display Deny Deny
LK8 Malicious Call Trace Deny Deny
Page 06
LK1 ACR Normal Originate Deny Deny
LK2 VM MSG Key Deny Deny
LK3 Forced Account Code - VERIFY/UNVERIFY
To turn on/off display of new message sent to a
Voice Mail Box.
Deny Deny
LK4 ISDN Supplementary Services Deny Deny
LK5 Not used
LK6 Not used
LK7 Not used
LK8 Not used
N
1. Setting Page 04 - LK4 to ON will affect the “Speed Dial” Name match feature, therefore this setting is required
to be set to OFF at all times.
2. Page 06 is applicable to main software Release 4.0 and above.
To Next Page
Loading...
Need help?
General
