Programming Manual May 2003
VRS Message Function Assignment 1 - 207
A6-324000-642-02 - Release 6.0
May 2003
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 +
ACto access the Memory Block.
3 Press corresponding CO/PBX line key to change data option.
Note: Use
K~Ito enter VRS Channel and message number.
Default Values
All Channels of Block: No Message
4 Press
Nto write the data and advance to the next VRS Channel or message number.
5 After entering last data, press
Nto write the data.
6 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
Refer to Chapter 2 Guide to Feature Programming.
To Next Page
Loading...
