NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 390 Digit Add/Del for Tie Line Networking
A6-324000-642-02 - Release 6.0
May 2003
Related Programming
M.B. Number Memory Block Name
1-1-46
Access Code (1-Digit) Assignment
3-03
Trunk-to-Trunk Group Assignment
N
1. This Memory Block applies only when two or more systems are connected by Tie lines or when the systems are
connected by a DID line.
2. If the call is intended for another system, the Tie line is directed to resend the number.
3. At default, DID lines are not assigned to a Trunk Group.
4. This Memory Block affects T1 channels assigned as Tie/DID lines.
To Next Page
Loading...
