NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 46 System Speed Dial Restriction by Tenant
A6-324000-642-02 - Release 6.0
May 2003
Programming Procedures
1 Go off-line.
2 Press LK1 +
LK1 + AH to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the tenant number.
Note: Use the following to enter data:
J to move the cursor left
L to move the cursor right
K~Ito enter numeric data
S to move to the next page
T to move to the previous page
Each time a CO/PBX line key is pressed, the LED toggles between On and Off.
Default Values
All System Speed Dial buffers can
be dialled from any tenant.
4 After entering all pages for the selected Speed Dial Buffer No., press
Nto write the data. The next Speed Dial Buffer No. is
displayed.
5 After entering data for all of the Speed Dial Buffer Nos., press
Nto write the data for the last Speed Dial Buffer No. The next
Memory Block is displayed.
6 Press
Pto go back on-line.
Related Programming
M.B. Number Memory Block Name
1-1-33
Speed Dial Number/Name Display Selection
1-1-35
Speed Dial Buffer Allocation
4-09
Telephone to Tenant Assignment
N
1. One or more tenants can be enabled to use each group.
2. Use this Memory Block to assign which tenants use each group.
3. When speed dial is set to 1000, 900~999 cannot be restricted.
4. The X in each Speed Dial Buffer No. is displayed even if it is not entered.
5. In Memory Block 1-1-18 System Speed Dial Restriction by Tenant, tenant numbers 00~07 are assigned to Flexible
Line keys on the first page. Tenant numbers 08~15 are assigned to the Flexible Line keys on the second page. The
tenant number corresponding to Flexible Line key 1 of the current page is displayed on the right side of the display. In
all cases, each page is represented by eight line keys.
Speed Dial buffers have nine groups. These groups are listed in the table below.
Speed Dial
Buffer No.
Speed Dial Number
80 Codes 1000 Codes
0X 00~09 000~099
1X 10~19 100~199
6X 60~69 600~699
7X 70~79 700~799
8X N/A 800~899
∼
∼
∼
X = Any digit 0~9
CO/PBX
Line LED
Off On
Data Restricted Not restricted
To Next Page
Loading...
Need help?
General
