NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 56 Automatic Day/Night Mode Switching Time Assignment
A6-324000-642-02 - Release 6.0
May 2003
N
1. The start times for Day Mode or Night Mode can be specified in System Programming to automatically switch
modes at the specified times.
2. A start time for Day Mode only or Night Mode only cannot be programmed.
3. Day Mode and Night Mode cannot be programmed to have the same start time.
4. The time is entered in 24-hour time only.
5. The first time input indicates when Day Mode starts. The second time input indicates when Night Mode starts.
6. Refer to Memory Block 1-1-32 Automatic Day/Night Mode by Day of Week Selection for selecting either Pattern 1
or Pattern 2 Day/Night Mode start times for each day of the week. Assigning each day of the week to either Pattern
1 or Pattern 2 allows Day/Night Mode start times for Monday through Friday to differ from Day/Night Mode start
times for Saturday and Sunday.
To Next Page
Loading...
Need help?
General
