NEC Xen Master Programming Manual

NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 72 Access Code (1-Digit) Assignment
A6-324000-642-02 - Release 6.0 May 2003
Default Dial Numbers and Function Numbers
Default
Dial No.
Function
No.
Function Name
177 Specified Station Access Code 01
178 Specified Station Access Code 02
179 Specified Station Access Code 03
180 Specified Station Access Code 04
181 Specified Station Access Code 05
182 Specified Station Access Code 06
183 Specified Station Access Code 07
184 Specified Station Access Code 08
185 Specified Station Access Code 09
186 Specified Station Access Code 10
187 Specified Station Access Code 11
188 Specified Station Access Code 12
189 Specified Station Access Code 13
190 Specified Station Access Code 14
191 Specified Station Access Code 15
192 Specified Station Access Code 16
193 Specified Station Access Code 17
194 Specified Station Access Code 18
195 Specified Station Access Code 19
196 Specified Station Access Code 20
197 Specified Station Access Code 21
198 Specified Station Access Code 22
199 Specified Station Access Code 23
200 Not Used
201 Route Advance Block 01
Default Dial Numbers and Function Numbers
Default
Dial No.
Function
No.
Function Name
232 Route Advance Block 32
233 Not Used
250 ID Call Originate
251 DISA/ID Password Set (Any station)
252 DISA/ID Password Reset (Attendant
only)
253 DISA/ID Password Confirmation
(Attendant only)
254 Not Used
255 Not Used
301 Third Digit Table Number 01 (2-digit
Numbering Plan can only be entered.)
304 Third Digit Table Number 04 (2-digit
Numbering Plan can only be entered.)
401 Closed Number Block 1
416 Closed Number Block 16
501 VRS Voice Message Record/Verify/
Erase (Voice Prompt, Automated
Attendant)
502 Voice Mail Message Set
503 Voice Mail Message Cancel
601 ACR Table 1 •
602 ACR Table 2 •
603 ACR Table 3 •
604 ACR Table 3 •
∼ ∼
∼ ∼
∼
∼
∼
∼

Software Version 2.xx or higher allows Call Forward
Off Premise for CAR Keys to be set

Software Version 3.xx or higher has the ability to split
Call Forward Function No. 144 to 159
•
Software Version 6.XX or higher.
1. Increase RAB from 16 to 32.
2. Allows change from one ACR table to another
using access code.

NEC Xen Master Specifications

General

Brand	NEC
Model	Xen Master
Category	Telephone
Language	English