NEC Xen Master - Page 96

NEC Business Solutions Ltd Xen Master & Xen Axis
1 - 78 CO/PBX Outgoing Digit Add Assignment
A6-324000-642-02 - Release 6.0 May 2003
N
To assign System 1 in System Programming:
1. Memory Block 1-1-46 Access Code (1-Digit) Assignment. Assignment 2 → 401 (Closed Number Block 01).
2. Memory Block 1-1-49 Networking Trunk Group/Route Advance Assignment. Assignment Block 01 → 102 (Trunk
Group 02).
3. Memory Block 1-1-50 CO/PBX Outgoing Digit Add Assignment. Assignment Block 01 → Assign 2
4. Digits are added when the Access Code is dialled from the internal dial tone.
5. This Memory Block also applies to ISDN trunks.
Example:
Station 100
Dials 200
Add
200


Xen System
1
Xen System
2
Trunk
Group 02
Station 200 Rings