3.5
Date Code 20170927 Instruction Manual SEL-751 Relay
PC Software
Settings Database Management and Drivers
Database Manager
Select File > Database Manager on the main menu bar to create new
databases and manage records within existing databases.
Settings Database
Step 1. Open the Database Manager to access the database. Click
File > Database Manager. A dialog box appears.
The default database file already configured in QuickSet is
Relay.rdb. This database contains example settings files for the
SEL products with which you can use QuickSet.
Step 2. Enter descriptions for the database and for each relay or relay
in the database in the Database Description and Settings
Description dialog boxes.
Step 3. Enter special operating characteristics that describe the relay settings
in the Settings Description dialog box. These can include the
protection scheme settings and communications settings.
Step 4. Highlight one of the relays listed in Settings in Database and select
the Copy option button to create a new collection of settings.
QuickSet prompts for a new name. Be sure to enter a new
description in Settings Description.
Copy/Move Settings Between Databases
Step 1. Select the Copy/Move Settings Between Databases tab to
create multiple databases with the Database Manager; these
databases are useful for grouping similar protection schemes or
geographic areas.
Step 2. Click the Open B option button to open a relay database.
Step 3. Type a filename and click Open.
a. Highlight a device or setting in the A database,
b. Select Copy or Move, and click the > button to create a
new device or setting in the B database.
Step 4. Reverse this process to take devices from the B database to the
A database. Copy creates an identical device that appears in
both databases. Move removes the device from one database
and places the device in another database.
Create a New Database, Copy an Existing Database
To create and copy an existing database of devices to a new database:
Step 1. Click File > Database Manager, and select the Create New
Database button. QuickSet prompts you for a file name.
Step 2. Type the new database name (and location if the new location
differs from the existing one), and click Save. QuickSet
displays the message
Settings [path and filename] was
successfully created
.
Step 3. Click OK.
To Next Page
Loading...
