EasyManua.ls Logo

Schweitzer Engineering Laboratories SEL-751 - Table SET.1 Range Dependencies for the EDIR Setting; Table SET.2 Range Dependencies for the ORDER Setting

Schweitzer Engineering Laboratories SEL-751
934 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SET.6
of 78
SEL-751 Settings Sheets Date________________
Group Settings (SET Command) Directional Control
SEL-751 Relay Instruction Manual Date Code 20170927
Directional Control
(Hidden and EDIR is set to N if firmware option in the MOT is 0, 1, 3, or if Slot Z = Ax)
)
DIR CONTROL ENBL (Y, AUTO, N) EDIR :=
(The following directional control settings are hidden if EDIR := N.)
FWD DIR ON LOP (Y, N) (Hidden and set to N if VNOM := OFF) EFWDLOP :=
DIR CONTROL LVL1 (F, R, N) DIR1 :=
DIR CONTROL LVL2 (F, R, N) DIR2 :=
DIR CONTROL LVL3 (F, R, N) DIR3 :=
DIR CONTROL LVL4 (F, R, N) DIR4 :=
GND DIR PRIORITY
Range is determined by the following table. ORDER :=
PH DIR 3PH LVL (0.50–10.00 A {5 A nom}, 0.10–2.00 A {1 A nom}) (Hidden if
ELOAD := Y or hidden if VNOM := OFF) 50PDIRP :=
FWD DIR Z2 LVL (–128.00 to 128.00 ohm {5 A nom}, –640.00 to 640.00 ohm {1 A
nom}) (Auto-set to Z2R –1/INOM and hidden if EDIR := AUTO; Hidden if
VNOM := OFF) Z2F :=
REV DIR Z2 LVL (–128.00 to 128.00 ohm {5 A nom},
–640.00 to 640.00 ohm {1 A nom}) (Auto-set to MIN [(Z1MAG/2) + (1/INOM),
640/INOM] and hidden if EDIR := AUTO. Hidden if VNOM := OFF) Z2R :=
FWD DIR NSEQ LVL (0.25–5.00 A {5 A nom}, 0.05–1.00 A {1 A nom}) (Auto-set to
0.10 INOM and hidden if EDIR := AUTO. Hidden if VNOM := OFF) 50QFP :=
Table SET.1 Range Dependencies for the EDIR Setting
VSCONN SINGLEV
a
/VNOM
a
When SINGLEV := Y, VNOM is forced to OFF and hidden.
IN Nominal Current EDIR Range
3V0 SINGLEV := Y 0.2 A or 1 A or 5 A Y, N (AUTO is hidden from the range)
VS SINGLEV := Y 0.2 A EDIR hidden and forced to N
VS VNOM := OFF 0.2 A EDIR hidden and forced to N
Table SET.2 Range Dependencies for the ORDER Setting
DELTA_Y SINGLEV
IN Nominal
Current
VSCONN ORDER Range
WYE N 5 A or 1 A VS I, V, Q, IV, VI, QV, VQ, IQ, QI, IVQ, IQV, VQI, VIQ, QIV, QVI, OFF
DELTA N 5 A or 1 A VS I, Q, IQ, QI, OFF
WYE Y 5 A or 1 A VS I, OFF
DELTA Y 5 A or 1 A VS I, OFF
WYE N 0.2 A VS V, Q, P, U, VQ, QV, VP, QP, VS, VQS, QVS, VQP, QVP, OFF
DELTA N 0.2 A VS Q, OFF
WYE Y 0.2 A VS Hidden and set to OFF
DELTA Y 0.2 A VS Hidden and set to OFF
WYE N 5 A or 1 A 3V0 I, V, Q, IV, VI, QV, VQ, IQ, QI, IVQ, IQV, VQI, VIQ, QIV, QVI, OFF
DELTA N 5 A or 1 A 3V0 I, V, Q, IV, VI, QV, VQ, IQ, QI, IVQ, IQV, VQI, VIQ, QIV, QVI, OFF
WYE Y 5 A or 1 A 3V0 I, V, IV, VI, OFF
DELTA Y 5 A or 1 A 3V0 I, V, IV, VI, OFF
WYE N 0.2 A 3V0 V, Q, P, U, VQ, QV, VP, QP, VS, VQS, QVS, VQP, QVP, OFF
DELTA N 0.2 A 3V0 V, Q, P, U, VQ, QV, VP, QP, VS, VQS, QVS, VQP, QVP, OFF
WYE Y 0.2 A 3V0 V, P, U, VP, VS, OFF
DELTA Y 0.2 A 3V0 V, P, U, VP, VS, OFF

Table of Contents

Related product manuals