Schweitzer Engineering Laboratories SEL-751 - Modbus Register Map

A.15
Date Code 20170927 Instruction Manual SEL-751 Relay
Firmware, ICD, and Manual Versions
Instruction Manual
Section 8
➤
Updated Overview and Two-Line Display, including Figure 8.1: Front-Panel Overview.
➤ Added a note for target LEDs to Programmable LEDs.
➤ Added Touchscreen Display Front Panel.
Section 9
➤
Added Section 9: Bay Control.
Section 10
➤
Added a note to Event Reporting for SEL-751 models without voltage inputs.
➤ Added CEVENT, including Figure 10.6: Sample Compressed ASCII Event Report.
Section 11
➤
Updated Figure 11.6: Delta Voltage Source Connections and Table 11.6: Power Quantity Accuracy-Delta
Voltages.
➤ Updated Self-Test, including Table 11.8: Relay Self-Tests.
Appendix A
➤
Updated for firmware version R200-V1.
➤ Added SEL Display Package Firmware Versions, including Table A.2: SEL Display Package Firmware
Revision History and SEL Display Package and Relay Firmware Compatibility, including Table A.3: SEL
Display Package Compatibility With Relay Firmware.
Appendix B
➤
Added a note for firmware upgrades in the touchscreen display model.
Appendix D
➤
Updated DNP3 in the SEL-751, Data Access, and Control Point Operation.
➤ Updated Table D.7: Port DNP3 Protocol Settings.
➤ Added a note for OC and CC bits to Reference Data Map.
Appendix E
➤
Updated Overview and Table E.7: 02h SEL-751 Inputs.
➤ Added a note for OC and CC bits to 06h Preset Single Register Command.
➤ Updated Table E.33: Modbus Register Labels for Use With SET M Command and Table E.34: Modbus Register
Map.
Appendix F
➤
Updated Features for change in GOOSE message count from 16 to 64.
➤ Updated Table F.20: Logical Device: PRO (Protection) and Table F.21: Logical Device: MET (Metering).
Appendix I
➤
Updated Overview, Table I.1: PMU Settings in the SEL-751 for C37.118 Protocol in Global Settings, and
Table I.6: SEL-751 Ethernet Port Settings for Synchrophasors.
➤ Updated Synchrophasor Relay Word Bits, Protocol Operation, and IEEE C37.118 PMU Setting Example.
Appendix J
➤
Updated Settings for Port 2.
Appendix K
➤
Updated K.1: SELOGIC Relay Word Bits.
➤ Updated K.2: Relay Word Bit Definitions for the SEL-751 Relay.
Appendix L
➤
Updated Table L.1: Analog Quantities.
Appendix M
➤
Updated Settings Erasure for the CAL access level.
Glossary
➤
Updated for new features.
Table A.8 Instruction Manual Revision History (Sheet 3 of 9)
Revision Date Summary of Revisions