EasyManua.ls Logo

Schweitzer Engineering Laboratories SEL-751 - Applications

Schweitzer Engineering Laboratories SEL-751
934 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.7
Date Code 20170927 Instruction Manual SEL-751 Relay
Introduction and Specifications
Applications
Accessories
Contact your Technical Service Center or the SEL factory for additional detail
and ordering information for the following accessories:
External RTD protection
SEL-2600 RTD Module (with ST
option only)
A simplex 62.5/125 µm fiber-optic cable with ST
connector for connecting the external RTD module to
the SEL-751
SEL-2505 Remote I/O Module (with SEL-2812 compatible ST
fiber-optic port) for connection to relay fiber-optic serial Port 2,
or use SEL-2505 with EIA-232 (DB-9) serial port to connect to
EIA-232 Port 3 on the relay.
SEL-C804 and SEL-C814 Multimode Fiber-Optic Arc-Flash
Detection (AFD) Sensors and Accessories
SEL-751 Configurable Labels
Rack-Mounting Kits
For one relay
For two relays
For one relay and a test switch
Wall-Mounting Kits
Bezels for Retrofit
Replacement Rear Connector Kit
Dust Protection Kit
Relay Wire Termination Kits—See Application Note
AN2014-08.
For all SEL-751 mounting accessories for competitor products, including
adapter plates, visit selinc.com/applications/mountingselector/.
Applications
The SEL-751 Feeder Protection Relay has many power system protection,
monitoring, and control applications. Figure 1.1 shows some of the typical
protection applications for the SEL-751. You can use the SEL-751 directional
and nondirectional overcurrent functions to protect virtually any power system
circuit or device including lines, feeders, transformers, capacitor banks,
reactors, and generators. Over- and underfrequency, over- and undervoltage,
and synchronism-check elements are well suited for applications at distributed
generation sites. Directional power elements in the SEL-751 also make the
relay suitable for utility or customer interface protection where customer
generation is present.
You can use powerful SEL
OGIC control equations in all SEL-751 models to
provide custom protection and control applications. SEL application guides
and technical support personnel are available to help with unique applications.

Table of Contents

Related product manuals