6/02
2-234
DC1632/2240
12-901
Prelaunch Training/Review
Status Indicator RAPs
12-901 Power On H Transport Entrance Sensor
The H Transport Entrance Sensor detected a paper at power on, when all the interlock were
closed, or at initialization.
Procedure
Check the following:
ï The Actuator for return failure
ï Enter dC330 [012-103] and press Start. Check only the signal wire of the sensor.
ï Check that the power voltage at the customer site does not drop.
Figure 1 Component Location
Figure 2 H Transport Entrance Sensor CD
Figure 3 Finisher PWB
Entrance
Sensor
To Next Page
Loading...
