6/02
2-290
DC1632/2240
16-778, 16-779
Prelaunch Training/Review
Status Indicator RAPs
16-778 HD Capacity
The insufficient HD capacity was detected during scanned image conversion process by I-For-
matter.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Create free space of the HD capacity and retry scanning.
16-779 Scan Image Conversion
An error has occurred due to other causes than HD Access during scanned image conversion
process by I-Formatter.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Again, switch power off then on and perform the operation again.
To Next Page
Loading...
Need help?
General