Alcatel-Lucent OmniAccess 5740 - Qos Show Commands

QoS Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1013
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
QOS SHOW COMMANDS
The QoS show command displays the following details:
1. Number of packets dropped from a queue.
2. Number of packets transmitted through a queue.
3. Number of packets currently in the queue (queue length).
4. Total amount of bytes transmitted from a queue.
T
O VIEW THE CLASS-MAP CONFIGURATION
EXAMPLE
ALU(config)# show class-map cmap1
class-map c1 match-any
1 match any m1 m2
2 match any m2 m4 m5
T
O VIEW THE POLICY MAP CONFIGURATION
EXAMPLE
ALU(config)# show policy-map P1
policy-map p1
interface serial0/0:0 EGRESS
10 class cm_ef
random-detect ip-dscp
20 class cm_af11
65535 class class-default
Command (in SUM/CM) Description
show class-map [<name>] This command shows all or specified
class map along with its match-lists.
Command (in SUM/CM) Description
show policy-map [<name>] This command shows the details of all or
specified policy map configured in the
system.