Alcatel-Lucent OmniAccess 5740 Cli Configuration Guide

TFTP Server Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1075
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
TFTP SERVER CONFIGURATION COMMANDS
TO ENABLE/DISABLE TFTP SERVICE
EXAMPLE
ALU(config)# tftp-server enable
ALU(config)# tftp-server disable
T
O CONFIGURE FILES FOR DOWNLOAD THROUGH TFTP AND TO CREATE FILE ALIAS
Command (in CM) Description
tftp-server enable This command is used to enable TFTP
service on the OmniAccess 5740 USG.
By default, TFTP service is disabled.
tftp-server disable This command is used to disable TFTP
service on the OmniAccess 5740 USG.
Command (in CM) Description
tftp-server <filename with
path> [alias <file-alias>]
This command is used to specify files
allowed for download through the TFTP
server.
Using the 'alias' keyword, you can create an
alias for the file. You can then download the
file through this alias, instead of its actual
path. This could be useful if the file's name
or path is tedious. A file can have multiple
aliases.
Note: Alias must be a unique name
and no two files can have the
same aliases.
no tftp-server {<filename
with path>|alias <file-
alias>}
This command is used to remove the file
from the tftp file-list.
If a file is removed from the tftp-file list, then
all its aliases are also removed.

Alcatel-Lucent OmniAccess 5740 Specifications

General

Brand	Alcatel-Lucent
Model	OmniAccess 5740
Category	Gateway
Language	English