Alcatel-Lucent OmniAccess 5740 - Clear Commands in Ipsec

IPsec VPN Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
861
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
CLEAR COMMANDS IN IPSEC
TO CLEAR CRYPTO IPSEC COUNTERS
EXAMPLE
ALU# clear crypto ipsec counters
ALU#
T
O CLEAR CRYPTO IPSEC SA
Note: The sa-index must be a valid sa-index of an outbound SA.
E
XAMPLE
ALU# clear crypto ipsec sa all
ALU#
ALU# clear crypto ipsec sa 16
ALU#
Command (in SUM/CM) Description
clear crypto ipsec counters This command is used to reset the IPsec
SA related counters for Encapsulation,
Encryption, Authentication, and Error.
Command (in SUM/CM) Description
clear crypto ipsec sa
{all|<1-65535>}
This command is used to clear all the
IPsec SAs or IPsec SAs corresponding to
a specific SA index.
As a result, the SA pair will be cleared and
the tunnel will be brought down.