Multicast Routing
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
609
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
CHAPTER 27 MULTICAST ROUTING
This chapter covers the Multicast routing configuration for the OmniAccess 5740
USG.
For instructions on using the commands and descriptions on each of their
parameters with the corresponding default values, refer to the OmniAccess 5740
Unified Services Gateway CLI Command Reference Guide.
This chapter includes the following sections:
• “Multicast Overview”
• “PIM Configuration”
• “IGMP Configuration”
• “Multicast Configuration on OmniAccess 5740 USG”
The “Multicast Overview” section serves as an additional information on the
Routing Information Protocol. You can skip this section, and directly go to the
configuration section of this chapter.
CHAPTER CONVENTIONS
Acronym Description
BSR Bootstrap Router Mechanism
CM Configuration Mode - ALU (config)#
DR Designated Router
FIB Forwarding Information Base
ICM Interface Configuration Mode - ALU (config-interface name)#
IGMP Internet Group Multicast Protocol
PIM Protocol Independent Multicast
PIM-SM Protocol Independent Multicast Sparse Mode
RIB Routing Information Base
RP Rendezvous Point
RPF Reverse Path Forwarding
SUM Super User Mode - ALU#
To Next Page
Loading...
Need help?
General
