Open Shortest Path First
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
573
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
CHAPTER 26 OPEN SHORTEST PATH FIRST
This chapter covers the Open Shortest Path First (OSPF) configuration for the
OmniAccess 5740 USG.
For instructions on using the commands and descriptions on each of their
parameters with the corresponding default values, refer to the OmniAccess 5740
Unified Services Gateway CLI Command Reference Guide.
This chapter includes the following sections:
• “OSPF Overview”
• “OSPF Configuration”
• “OSPF Configuration on OmniAccess 5740 USG”
The “OSPF Overview” section serves as an additional information for Open
Shortest Path First Protocol. You can skip this section, and directly go to the
configuration section of this chapter.
CHAPTER CONVENTIONS
Acronym Description
ABR Area Border Router
ASBR Autonomous System Border Router
CM Configuration Mode - ALU (config)#
ICM Interface Configuration Mode - ALU (config-interface name)#
LSA Link State Advertisement
NSSA Not-So-Stubby Areas
OSPF Open Shortest Path First
RCM Router Configuration Mode - ALU (config-router ospf)#
SUM Super User Mode - ALU#
TSA Totally Stubby Areas
To Next Page
Loading...
Need help?
General
