Alcatel-Lucent OmniAccess 5740 - Qos Clear Commands; Qos Debug Commands

QoS Configuration
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
1021
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
QOS CLEAR COMMANDS
TO CLEAR QUEUING STATISTICS
EXAMPLE
ALU(config)# clear queuing statistics
Success : Cleared ingress stats for interface GigabitEthernet 3/0.
Success : Cleared egress stats for interface GigabitEthernet 3/0.
QOS DEBUG COMMANDS
TO DEBUG QOS CREDITS
EXAMPLE
ALU(config)# qos credits debug
Command (in SUM/CM) Description
clear queuing statistics
[{<interface-name>
{in|out}|in|out}]
This command clears the QoS statistics
on that particular interface.
Command (in SUM/CM) Description
qos credits debug This command is used to get the credits
used for all the interfaces.