Border Gateway Protocol
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
557
Alcatel-Lucent
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
CHAPTER 25 BORDER GATEWAY PROTOCOL
This chapter covers the Border Gateway Protocol (BGP) configurations used in
the OmniAccess 5740 USG. It provides a broad overview on BGP-4 configuration
including the neighbors, networks, advertising networks, reset, and monitoring
commands.
For instructions on using the BGP commands and descriptions on each of their
parameters with the corresponding default values for each, refer to the
OmniAccess 5740 Unified Services Gateway CLI Command Reference
Guide.
This chapter includes the following sections:
• “BGP Overview”
• “BGP Configuration”
• “A Typical BGP Example Using OmniAccess 5740 USG”
The “BGP Overview” section serves as an additional information on BGP. You can
skip this section, and directly forward to the configuration section of this chapter,
detailed in “BGP Configuration”.
CHAPTER CONVENTIONS
Acronym Description
AS Autonomous System
BGP Border Gateway Protocol
CM Configuration Mode - ALU (config)#
RCM Router Configuration Mode - ALU (config-router bgp)#
SUM Super User Mode - ALU#
To Next Page
Loading...
Need help?
General
