Point-to-Point Protocol over Ethernet (PPPoE)
Left running head:
Chapter name (automatic)
366
Beta Beta
OmniAccess 5740 Unified Services Gateway CLI Configuration Guide
Alcatel-Lucent
PPPOE SHOW COMMANDS
TO VIEW PPPOE CONFIGURATION
EXAMPLE
ALU(config)# show pppoe configuration GigabitEthernet 3/0
pppoe max-retry: 15
pppoe retry-timer: 5(s)
pppoe service-name: ISP1
T
O VIEW PPPOE STATISTICS
EXAMPLE
ALU(config)# show pppoe statistics GigabitEthernet 3/0
PADI sent: 13
PADO received: 24
PADO dropped: 11
PADR sent: 13
PADS received: 13
PADT sent: 12
PADT received: 0
Command (in SUM/CM) Description
show pppoe configuration
GigabitEthernet <slot/port>
Displays the PPPoE specific
configurations on the GigE interface.
Command (in SUM/CM) Description
show pppoe statistics
GigabitEthernet <slot/port>
Displays the PPPoE statistics
information on the GigE interface.
To Next Page
Loading...
Need help?
General
